The Whirlamatic^TM 20 Plus 1500 rpm burnisher gives floors a mirror-like shine in one 20 in (51 cm) pass. A number of design features boost performance output to 10,000 square feet (925 m2) an hour... high quality results in a very short time.

One of those features is the exclusive "pintle" motor mounting which allows the motor itself to pivot as one with the flexible, direct-mounted pad holder. A gas cylinder at the rear handle of the Whirlamatic^TM 20 Plus assures even pressure, forcing full pad contact on the floor. Neither uneven floors nor operator inexperience can affect the pad pressure, as weight is evenly maintained while the pad turns. The result is a consistent luster over the entire burnished floor.

Simplicity in design reduces downtime. Direct drive to the pad holder eliminates the need for belts and pulleys.

With the convenience of cord-electric operation, the Whirlamatic^TM 20 Plus is ready when you are. Its size and low profile make it easy to maneuver in close or obstructed areas. Operation is simple and safe. The Whirlamatic^TM 20 Plus moves along without side-to-side torque. Large, non-marking wheels make it easy to transport.

Exclusive "pintle" motor mounting allows motor to pivot with the flexible direct mounted pad holder

High speed 1500 rpm burnishing with 1.5 hp motor

Gas cylinder design keeps constant pressure on full contact pad, producing an even shine

For superior performance, durability and simple operation, depend on the Whirlamatic^TM 20 UHS. This 20 inch (43 & 51 cm) cord electric burnisher gives floors a mirror-like shine in one pass. Incorporated into this burnisher are performance features that ensure maximum productivity. An exclusive Constant-Flo^TM design uses a patented torsion spring design to eliminate any operational variances and the need for caster wheels, making burnishing almost foolproof. Neither uneven floors nor operator inexperience can affect the brush/pad pressure. Weight is evenly maintained while brush/pad turns at 1500 rpm's. The result is a consistent luster across the floor.

Simplicity in design reduces downtime. Direct drive to the brush and pad holder eliminates the need for belts and pulleys. With the convenience of cord-electric operation, the 17 or 20 UHS is ready when you are. Their size and low profile make them maneuverable in obstructed areas. The 20 UHS burnishes at a rate of 10,000 sq ft an hour. The 17 inch will burnish 9100 sq ft per hour.

Operation is safe and simple without side to side torque. Large, non-marking wheels make them easy to transport.

Patented Constant-Flo torsion spring design to maintain pad contact on uneven floors

Center mounted direct drive motor distributes weight evenly

High speed burnishing at 1500 rpm with 1.5 hp motor

Finger tip handle release lever

The Triple S Q-Line Floor Machines are built for dependable performance year after year. The time tested design and commercial grade components can be counted on to handle multiple tasks throughout your facility.

the Q-1500 high speed burnisher is powered by an industrial 1.5 hp DC motor. The high impact ABS base withstands cracks, dents and corrosion. It comes with a flex pad driver for excellent gloss performance on uneven flooring.

The Q-Line Floor Machines combine value with performance without sacrificing dependability

Specifications

At 2000 rpm, the Whirlamatic 20 Ultra can give your floors a mirror-like shine in one pass. And unlike other burnishers that adjust pad pressure with a front-mounted caster, the Whirlamatic 20 Ultra uses a gas shock. This gas shock, a flexible pad holder and an exclusive pivoting motor keep the pressure evenly distributed against the contours of your floor so 100% of the pad makes contact at all times, whether the surface is even or uneven. The result is a consistent luster in less time.

A shroud confines burnishing dust under the base of the machine, where air movement blows the dust into a disposable collector bag. Area floors and surroundings are kept free of dust.

The strong, pentagonal handle features comfortable grips for easier operation. There's no side-to-side torque to wrestle with. Due to the direct-drive motor, there are no belts or pulleys to replace. A light lets you know when the motor brushes are ready for replacement. The entire machine is easy to operate even for inexperienced operators.

The Whirlamatic^TM 20 Ultra. It's the ultimate way to burnish floors.

Exclusive "pintle" motor mounting allows motor to pivot with the flexible direct mounted pad holder

Extra high speed 2000 rpm burnishing with 1.5 hp motor

Superior dust collection system for one pass burnishing

Gas cylinder design keeps constant pressure on full contact pad, producing an even shine

High Speed Floor Burnisher

For fast burnishing with exceptional results, the Mustang 1500 is an outstanding value in high speed floor care. Operating at 1500 RPM, the Mustang 1500 delivers a high-gloss 'wet-look' shine at an economical price.

The Mustang 1500 features a flexible, built-in pad driver for smooth, balanced, and safe operation.

Built-in wheel carriage allows easy transport of the machine on stairs.

The Mustang 1500 is available with NSS' Vac-Trac Dust Control System to capture dust and deposit it into a filter in the front of the machine, maintaining IAQ.

The Mustang 1500 features a mechanical lock-out which must be released before the switch lever can be activated, This safety feature prevents unauthorized operation of the machine if it is left unattended.

20-Inch High Speed Burnisher

The Charger 1500 is a signature machine in the NSS® line. This burnisher represents the very definition of versatility - at 1500 RPM, it can burnish, spray buff, and damp strip. An aggressive pad speed and rugged construction enable it to produce that ultra-gloss "wet-look" shine year after year.

The 1.5 HP motor has more than enough power for any floor care job, and will not bog down during really tough tasks.

The structural foam, rigid-back pad driver si factory aligned to compress the pad for maximum burnishing performance. This also reduces the electric load, allowing the machine to operate on a 15-amp circuit.

The handle is removable for transportation, and can be reversed for storage. The hand grips are positioned at the ergonomically optimal angle of 10 degrees.

Built for the rigors of daily commercial use, the Charger 1500 features a cast aluminum base, 1.5-in. diameter steel handle, and heavy-duty metal cord strain relief.

An optional wheel carriage allows the Charger to be easily transported on stairs.

20-Inch Ultra-High Speed Burnisher

The Charger 2500, also known as "The Finisher." is the perfect burnisher for marble or terrazzo floors, producing a brilliant high-gloss shine. Ideal for use in high-speed maintenance programs, the Charger 2500 brings floors back to their peak appearance after damp mopping or auto-scrubbing.

This electric-powered machine turns a 20-inch pad at 2500 RPM to give the floor a shine comparable to that produced by a big battery machine at half the price of battery buffers. The Charger 2500 has exceptional maneuverability, which makes it the perfect burnisher for narrow hallways as well as open areas. This buffer is recommended for areas up to 15,000 square feet.

The flexible pad driver on the Charger 2500 adjusts to uneven floors for consistent burnishing. The operator can easily adjust pad pressure to compensate for varying pad thickness and wear with the aid of the pad pressure knob at the front of the machine. A convenient color-coded meter on the top of the motor cover keeps the operator aware of pad pressure at all times.

Put a hard, high-gloss shine on large-area floors in a hurry with the Whirlamatic^TM VS20 or 20UHSB battery-powered burnishers. These high-production models shine a 20 inch (51 cm) path at a rate of 27,000 square feet (2,500 m2) per hour, saving time and money.

Side-by-side comparison tests using a gloss meter on a burnished floor show that the VS20 and 20UHSB produce a brighter shine than competitive battery burnishers.

One reason the VS20 and 20UHSB are so effective is the carefully balanced ratio of weight to pad speed, which produces a spectacular shine on properly prepared floors. A fully floating pad holder follows uneven floor surfaces, for an even shine. Results are an even, beautiful shine that resists scuffing and wear.

Both models feature a special dust-control system that collects dust in dual collector bags. The floor is left clean after each burnishing leaving no need for dust mopping after burnishing.

The VS20 model features variable-speed drive wheels, for easy transport and working maneuverability. Self-propelling drive on the VS20 glides over the floor with minimal operator effort. Both models have simple controls for easy operation.

Ask for a demonstration to see how these battery burnishers can save you time and money.

Designed for quiet cordless one pass burnishing

Dual dust collection bags

Pad driven and self propelled models available

Extra high speed 2000 rpm burnishing

Full adjustable pad pressure

High-Speed 20-Inch Battery Burnishers

The Charger 2025 DB / AB produces the high-gloss shine associated with propane buffers, but without the high maintenance requirements, noise, emissions, and safety concerns. This battery-powered burnisher features 2500 RPM pad rotation to generate a superior 'wet-look' shine.

The 36V battery system provides up to 3 1/2 hours of runtime per charge

0-30 lbs. of pad pressure, comparable to a 20-in. propane burnisher, produces a brilliant, high-gloss shine.

Quiet operation (only 74 dbA) means minimal disruption to customers and co-workers.

The Charger 2025 is available with either variable speed wheel/drive (DB) or pad-assist (AB) propulsion.

The .25 HP motor on the DB model powers a 2-wheel drive differential, with variable speed in both forward and reverse, so the operator can select the machine's drive speed to the operator's comfortable working pace.

On the pad-assist model the flexible, built-in pad driver is angled to the floor to help propel the unit.

The Vac-Trac^TM Dust Control System collects the pad dust created by burnishing.

27-Inch Battery Burnisher

A wide, productive walk-behind battery burnisher, the Charger 2716 AB produces a wet-look shine previously only attainable with a propane buffer, but without the high maintenance requirements, noise, emissions, and safety concerns.

3-HP pad driver motor for 3 hours of maximum power.

0-70 pounds of pad pressure for that brilliant, high gloss shine.

Quiet operation (only 71 dbA) means minimal disruption to customers and co-workers.

PROeye battery fluid level indicator, standard on NSS batteries, allows the operator to see at a glance when water needs to be added to a battery.

Sturdy, 7-gauge steel frame provides a strong, rugged structure.

Low profile pad driver makes burnishing under shelves easy.

The Vac-Trac^TM Dust Control System collects the pad dust created by burnishing.

27-Inch Battery Burnisher

The most productive walk-behind battery burnisher available today, the Charger 2716 DB Plus produces a wet-look shine, previously only attainable with a propane buffer.

Over 3 1/2 hours of run time for increased productivity.

0-70 pounds of pad pressure for that brilliant, high gloss shine.

Quiet operation (only 71 dbA) means minimal disruption to customers and co-workers.

Two-wheel drive with differential results in the most maneuverable 27" battery burnisher available today.

Variable-speed wheel drive, forward and reverse, allows the operator to match the machine's drive speed to a comfortable working pace.

7-gauge steel frame provides a strong, rugger structure.

Low profile offset pad driver makes burnishing under shelves easy.

27-Inch Battery Burnisher

The Charger 2717 DB battery burnisher is a completely new design, producing a wet-look shine without the need for operator adjustment.

70-80 pounds of pad pressure ensures a brilliant, high gloss shine - no operator adjustment needed.

Hinged 90° head mechanism for compact storage and standing paad changes.

Durable chain-drive wheel enhances maneuverability. Ergonomic variable speed drive system assures tremendous productivity by allowing the operator to work at a comfortable pace.

Offset body keeps the operator centered in the workpath for greater visibility, while the low profile offset pad driver makes burnishing under shelves easy.

Six-325 AH batteries result in up to 4 hours of constant run time.

Quiet operation (only 71 dbA) provides scheduling flexibility to burnish floors in occupied facilities at any time, with minimal disruption to customers and co-workers.

10-gauge steel channels create a strong, rugged structure.

The Advance Whirlamatic^TM Pro series propane burnishers will make your floor "POP". Propane burnishing is the most productive form of burnishing in terms of time and shine.

The Whirlamatic^TM Pro 21 has a 21 inch (53 cm) pad size, the Pro 24 has a 24 inch (60 cm) and the Pro 27 has a 27 inch (68 cm) pad size. These models are capable of burnishing from 25,000 to 33,000 sq ft (2322 to 3066 m2) per hour respectively, and can operate for up to 8 hours on a single tank of propane.

Powerful, 13, 17, or even 22 hp engines provide the torque to drive the pad at high rpm with the weight to produce a glassy shine. These engines are dependable, requiring minimal maintenance for the hours of productive work they provide. These propane burnishers are transportable, ready to go whenever and wherever they are needed.

The Whirlamatic^TM Pro series by Advance is the answer for your propane burnishing needs. The proof is in the shine.

Propane burnishers available in 21, 24 or 27 inch models

Optional engines include 13 hp Honda, 17 hp Kawasaki, and 22 hp Robin

High speed burnishing at 1800 rpm (24 inch, 27 inch) and 2000 rpm (21 inch)

Up to 8 hours run time on a single tank of propane

27-Inch Propane Burnisher

For the ultimate in high-gloss shine, the Commander 27 Propane Burnisher is the perfect machine. this rugged buffer is built with the safest engine and emission control system available today. In fact, the Commander 27 is designed with the most up-to-date technology in the industry.

Built with the rugged 17-HP Kawasaki engine on a cast aluminum frame, the Commander 27 is wide enough to buff 40,000 square feet per hour. A full tank of propane will last more than three and a half hours, keeping the Commander 27 on the job longer than most propane buffers.

The Commander 27 comes standard with the NSS Vac-Trac^TM Dust Collection System, which eliminates the powdered residue caused by burnishing old floor finishes.

A Low Oil Pressure Switch and Emission Warning Shutdown System are two safety features on this machine.

The Commander 27 meets EPA and California emission regulations.

The Advolution^TM 2710 rider burnisher makes the tedious task of burnishing clean, quick, and comfortable with superior results. Battery-operated, with a maneuverable front steering system, the Advolution 2710 eliminates the emissions and noise associated with propane burnishers.

The Advolution^TM 2710 rider burnisher provides maximum productivity with its extended battery run-time. On a single battery charge the 2710 is capable of covering a maximum of over 135,000 ft2 (12,500 m2). Average productivity of the 2710 is in excess of 30,000 ft2 (2,800 m2). The machine will automatically monitor and control the amount of pad pressure on the floor to ensure the most superior gloss level possible. The floating burnishing head coupled with a flexible pad driver follows uneven floor contours to provide a consistent shine.

Operators of the Advolution^TM 2710 rider burnisher can expect uncompromised safety. Open sight lines in front of the machine create a safe and comfortable ride for the operator. Automatic safeguards eliminate unmanned start-ups, which can lead to damaged floor finish. A safety switch prevents accidental pad start-up in the tilt-up position. Passive dust control is standard on the Advolution 2710 rider burnisher, which reduces the need for dust mopping. An active dust control kit is available as an option for environments that require a higher degree of filtration.

Mid-mounted, burnishing head tilts up for access to change burnishing pads quickly and easily

Steering is adjustable to five positions for operator comfort

Equipped with optional accessory kits, the Advolution 2710 becomes multi-functional

Battery operated riding burnisher